Tuile vitrée automatique formant la machine
Description du produit
Machine de formage automatique de carreaux
tuile vitrée complètement automatique de vente chaude formant la machine faisant la feuille de toit de construction
1 |
Inner diameter of manual decoiler |
500mm |
2 |
Outer diameter of manual decoiler |
1200mm |
3 |
Weight capacity of manual decoiler |
5T |
4 |
Appearance Size |
8500mm*1550mm*1300mm |
5 |
Raw Material |
colored steel or galvanized steel |
6 |
Roller material |
high grade 45# forged steel,polished,heated,quenched |
7 |
Blade Material |
CR12 with polished |
8 |
Chrome Coating |
coated with 0.05mm hard chrome |
9 |
Control System |
PLC control |
11 |
Hydraulic Power |
7.5 KW |
12 |
Roller station |
13 rollers |
13 |
Material of chain |
high grade 45# steel:polished,heated,quenched HRC 45-50 |
14 |
Speed of Product |
0-12m/min |
15 |
Thickness range |
0.2-0.8mm |
16 |
Type of cutting |
hydraulic cutting |
17 |
Coil Width |
1250mm |
18 |
Cover Width |
1100mm |
19 |
Material of rack |
complete welded structure of A3 steel plate |
20 |
Machine frame stand |
welded with 300H-steel |
21 |
Type of forming machine |
single station with chain transmission |
22 |
Thickness of side-wall |
16mm |
23 |
Shaft Diameter |
75mm |
24 |
Weight |
about 4 T |
25 |
Voltage |
380V 50HZ 3Phases( or as your local requirement) |
26 |
Electrical control |
PLC frequency control system |
MATÉRIEL:
(1) largeur de bobine: 1000 mm ~ 1250mm
(2) Épaisseur de bobine appropriée: 0.3mm - 0.6mm
(3) matières premières appropriées: bobine pré-peinte;
(4) contrainte de roulement: 235MPa
COMPOSANTS DE MACHINE:
(1) Un-coiler hydraulique: 1 ensemble
(2) Roll-Forming M / C: 1 ensemble
(3) presse hydraulique Die / Cutting M / C: 1 ensemble
(4) système de contrôle de PLC: 1 ensemble
(5) produit rack (non alimenté): 1 set
Groupes de Produits : Petit pain de structure métallique formant la ligne > Ligne de formage de rouleaux de carreaux émaillés